Extron electronic manual Panels and Cabling, Front Panel Features, Abc D E, SMD 101 Front Panel

Panels and Cabling

This section provides information on:

•Front Panel Features

•Rear Panel Features

•SMD 101 Power Up Procedure

•Hardware Setup Overview

Front Panel Features

The front panel of the SMD 101 is shown in figure 2 below.

ABC D E

IR

CONFIG

SMD 101

A Power LED	D IR receiver window
B Playback status indicator	E Config port
C Network status indicator

Figure 2. SMD 101 Front Panel

APower LED — Dual color LED lights solid green when the SMD 101 is powered. Lights solid red when standby mode is active.

BPlayback status indicator — Dual color LED indicates playback operation:

•Solid Green — The SMD 101 is actively decoding a source (clip, image, or stream).

•Blinking Green — A source (clip, image, or stream) is loaded but paused.

•Off — Playback has stopped.

•Solid Red — Unable to load (or play) the selected source.

CNetwork status indicator — Dual-color LED indicates network operation and connection or stream quality:

•Solid Green — Indicates network conditions are favorable for the current source. The LED is also green if the current source is a local file (see Browser Panel - Files on page 20).

•Red/Green — When flashing red and green, indicates encoder or network conditions could compromise image or audio quality, and buffers could be depleted.

•Red — When lit, indicates degraded server or network conditions are compromising video or audio quality and may have depleted the buffers.

•Off — No network connection.

NOTE: In many cases, the error correction features of the SMD 101 allow good image quality even when degraded network conditions are indicated.

SMD 101 • Panels and Cabling 8