Extron electronic SMD 101 manual X54@, X52@, X55V Vol, Outputs Video, Test pattern

Command and Response Table for Player SIS Commands (continued)

Command	ASCII Command				Response		Additional Description
	(host to unit)				(unit to host)
Outputs
Video
Set video output	E X3^VTPO}				Vtpo X3^]
format
View video output	E	}			X3^]
format	VTPO
View output rate	E	}			X52!]
	RATE
Set output rate	E X52!RATE}				Rate X52!]
Mute all outputs to	1B				Vmt1]
black
Mute all sync and	2B				Vmt2]
video
Unmute all outputs	0B				Vmt0]
View	B				X54@
Test pattern
Select test pattern	EX52@ TEST}				Test X52@]		Set the test pattern to X52@.
View	E	}			X52@]		View the current test
	TEST						pattern.
Audio
Set dual mono	E			}	Afmto1	]
	o1AFMT
Set stereo	E			}	Afmto2	]
	o2AFMT
View audio output	E		}		X55!]
format	oAFMT
Set volume	X55)V}				Vol X55)]		Set analog volume to X55).
Increment volume	+V}				Vol X55)]		Increment analog audio
							volume up by 1 dB.
Decrement volume	-V}				Vol X55)]		Decrement analog audio
							volume down by 1 dB.
View volume	V}				X55)]		View the analog output
							volume.
Mute on	1Z				Amt1]		Mutes selected audio
							channel.
Mute off	0Z				Amt0]		Unmutes selected audio
							channel.
View audio mute	Z				X51)]		0=Mute off
status							1=Mute on.

NOTES:

X3^ = HDMI output format X51) = Enable or disable

 X52! = Video output rate  X52@ = Test pattern  X54@ = Video mute

 X55) = Audio volume

 X55! = Analog audio format

See HDMI output format table on page 64.

0=Mute off/disabled

1=Mute on/enabled

See video output rate table on page 64. See test pattern selection table on page 65.

0=Unmute all

1=Mute to black

2=Mute video and sync

0 to -100dB in 1 dB steps -30=default -100=mute

1=Dual mono

2=Stereo (default)

SMD 101 • Remote Communication and Control 80