Extron electronic SMD 101 manual In general, configuration settings and files can be, Ezfff, Ezxxx

The web-based user interface explains what is retained by each reset. The following table outlines configuration settings and files affected by the SIS command and rear panel resets.

In general, configuration settings and files can be:

•Retained (not affected by the reset).

•Reset to factory (the original factory firmware replaces the current).

•Erased (the configuration settings or files are deleted).

	Device Reset From:
	SIS	Rear Panel	Web-	Firmware	User	Network	Device	Passwords	IP
	Command		based User		File	Shares	Config		Settings
			Interface		System
Factory	n/a	Mode 1	n/a	Factory	Retained	Retained	Retained	Retained	Retained
Firmware (one		(see note,
power cycle)		below)
Network (IP	n/a	Mode 4	n/a	Retained	Retained	Reset	Retained	Retained	Reset
settings) reset
Flash Reset	EZFFF}	n/a	n/a	Retained	Erased	Retained	Retained	Retained	Retained
System reset	EZXXX}	n/a	Reset device	Retained	Retained	Reset	Reset	Retained	Retained
(Factory			settings to
defaults).			default, but
User files			retain user
			files and all
and settings
			IP settings
Retained.
Reset device	EZY}	n/a	Reset device	Retained	Erased	Reset	Reset	Reset	Retained
settings and			settings
delete user			to default,
files.			delete user
Retain IP			files, retain
settings.			IP settings
Absolute	EZQQQ}	Mode 5	Reset device	Retained	Erased	Reset	Reset	Reset	Reset
Reset:			settings,
settings,			delete
files, and IP			internal user
settings.			files, and
			Reset all IP
			settings

NOTE: A browser refresh is required to see results of a reset.

SMD 101 • Reference Information 84