Extron electronic SMD 101 Command and Response Table for Basic SIS Commands continued, port#

Command and Response Table for Basic SIS Commands (continued)

Command	ASCII Command				Response					Additional
	(host to unit)				(unit to host)					Description
Direct access port
Set direct access	E [		port#	] }		[			]]	Set serial pass-through port
port map				MD	Pmd  port#					number.
Reset direct access	E			}	Pmd2001			]		Reset serial pass-through
port map		2001MD								port.
Disable direct access	E		}					]		Disable serial pass-through
port		0MD			Pmd00000					port.
View direct access	E		}		[	port#	]]			View serial pass-through
port map		MD								port.
Restart network
Restart network	E 2BOOT}				2BOOT]

NOTE: Changes made to the IP address, subnet mask, HDCP, host name, and gateway address do not take effect on Linux systems until the 2BOOT command is issued.

Changes made using the CISG command take place immediately.

SMD 101 • Remote Communication and Control 70