Extron electronic SMD 101 Configuration Page, Video Configuration, General Video Settings Panel

Configuration Page

The Configuration tab provides controls on the global navigation bar to adjust basic features of the SMD 101. The controls are in four groups; Video, Audio, On Screen Display, and Automation accessed from a ribbon toolbar across the top of the screen (see figure 24).

Video Configuration

Select Video to open the Video Configuration page (see figure 24). The page allows test pattern selection for troubleshooting or setup of connected displays, selecting the HDMI output mode, and configuration of the stream buffering.

Figure 24. Configuration - Video Configuration Page

General Video Settings Panel

This panel allows selection of a test pattern. The confidence display shows a thumbnail of the playing pattern (see figure 24).

Click the drop-down list under the test pattern confidence display and select a pattern from the following:

•	Alternating Pixels	•	Color bars
•	Alternating lines	•	Grayscale
•	Crosshatch	•	Ramp
•	Crosshatch 4x4	•	White field

Click the drop-down list again and select Off to stop playing the test pattern.

NOTE: When a test pattern is selected, source streaming stops and the test pattern is switched to the output. If the output format is changed, the test pattern is also stopped while the output reformats. You must then restart the test pattern from the player controls (press Play) or select another test pattern.

SMD 101 • Web-based User Interface 28