Extron electronic SMD 101 manual Advanced Configuration Page, Connection, Ethernet Settings panel

Advanced Configuration Page

The Advanced Configuration page provides options that are not frequently changed. The page is is always available, but options are dimmed depending on the current user privileges. It provides initial setup and administrator level configuration.

Figure 30. Advanced Configuration Ribbon

Connection

The Connection Settings page allows configuration of parameters related to the LAN (Ethernet) and serial ports.

Ethernet Settings				Network Port Mapping
	Use DHCP							Port	Enable	Reset
(Obtain IP address automatically)					SFTP:		22022
					SIS (SSH):	22023				Reset
		IP Address:	10.13.193.168
										Reset
		Subnet Mask:			Telnet (Extron SIS):	23
			255.255.0.0
	Default Gateway:				HTTP:	80				Reset
			10.13.0.100
		DNS Server:			SNMP:	161				Reset
			10.1.0.7
		Host Name:			HTTPS/SSL:	443				Reset
			SMD-101-0A-12-73
					Serial Pass-through:					Reset
		Link Local: 169.254.4.247
		MAC Address:	00-05-A6-0A-12-73
		Reset to Default

Save Cancel

Reset to Default

			Serial RS-232 Settings
Ethernet Diagnostics
	Address to ping:		Mode:	SIS
		Ping	Baud Rate:	9600

Stop Bits: 1

Bits: 8

Parity: None

Reset to Default

Save Cancel

Figure 31. Connection Settings Page

Ethernet Settings panel

This panel provides basic ethernet configuration including:

•Use DHCP — Click the checkbox to enable DHCP. The IP Address, Subnet Mask, Default Gateway, and DNS Server fields dim.

•IP Address: — Under DHCP control, this field displays the assigned IP address. Otherwise, enter a static IP address here.

•Subnet Mask: — Under DHCP control, this field displays the assigned Subnet Mask. Otherwise, enter a mask here.

•Default Gateway: — Under DHCP control, this field displays the assigned default gateway address. Otherwise, enter the default gateway address here.

•DNS Server: — Under DHCP control, this field displays the assigned DNS Server address.

•Host Name: — Enter a name for the device here. The name assists identification.

•Link Local: — An IP address automatically negotiated by the SMD 101 when not assigned a static IP address and DHCP is disabled, or when DHCP is enabled but a

DHCP server is not found. SMD 101 • Web-based User Interface 34