Extron electronic SMD 101 manual On Screen Display, Status Information Panel

On Screen Display

The On Screen Display (OSD) page (see figure 26) enables the display of realtime information about the video output and device operation on a connected display (see figure 27).

On Screen Display

Status Information

Enable OSD

Duration (Seconds): 5

Position: Left-Top

Save Cancel

Progress Bar

Enable Progress Bar

Duration (Seconds): 5

Position: Center-Bottom

Save Cancel

Figure 26. Configuration Page - On-Screen Display

Status Information Panel

The Status Information panel controls the timing and position of the on-screen status information that includes stream, network condition, and device information.

Extron Electronics	192.168.254.254
SMD 101 Stream Media Decoder	FW: 1.20

VIDEO STREAM 0 encoding: h264 video width: 704

height: 576

framerate: 25

interlaced: false

STATUS INFORMATION

Network Condition: Very Good

Audio Bitrate: 124 Kbps

Video Bitrate: 3618 Kbps

AUDIO STREAM 0 encoding: mpeg4_aac_audio profile: Ic

channels: 2

rate: 44100

signed: true

DEVICE INFORMATION CPU: 21%

Mem: 37% used

Temp: 58.5C

Date: 12/01/2013 15:10

SOURCE RATE	OUTPUT RATE
704x576 @ 25 AAC-LC	1080p @ 60

Figure 27. On-screen Status Information Panel

Enable OSD — Click this checkbox to enable the status information.

Duration (Seconds) — Set the time in seconds the status information is on screen after the start of playback using the adjustment arrows or enter the time (in seconds) directly. Default is 5 seconds, maximum is 500 seconds. 501 seconds = always on. The IR remote can toggle it on or off.

Position — Select the screen position from one of nine positions (left-top (default), center-top, right-top, left-center, center-center, right-center, left-bottom, center-bottom, right‑bottom) using the drop-down list.

SMD 101 • Web-based User Interface 31