Introduction, cont’d

All models

Bandwidth — Bandwidth is 350 MHz (-3 dB). This high bandwidth allows the switchers to switch all of the high-resolution video signals with no loss of signal quality.

Input signal sensing — The switcher continuously monitors all inputs to sense when the input signal is active or inactive. The switcher reports changes in the status of each input (active to inactive or inactive to active) on the RS-232 port.

Autoswitching mode — When autoswitching is enabled, the switcher continuously monitors all inputs and automatically switches to the highest-numbered input with video sync pulses present. If video is absent from all inputs, no input is selected.

Operational flexibility — The operator can select the input and set the audio gain

and attenuation for each input using the front panel buttons or via the switcher’s Remote port RS-232 link. The RS-232 link allows remote control via a PC or control system. The operator can select inputs via the switcher’s contact closure link on the Remote port. The operator can also remotely control the switchers using a contact closure keypad connected to the Remote port or an Extron IR 102 Universal remote control kit (part #70-224-01) connected to the Remote port.

Rack mount — Rack mountable in any conventional 19" wide rack with the supplied rack ears. The two SW2 models require an optional 1U Universal Rack Mount Kit (part #60-190-01) for rack mounting.

Power supply — Includes an internal 100 VAC to 240 VAC, 50/60 Hz, 20 watts, auto-switchable power supply, which provides worldwide power compatibility.

1-4 SW RGB and YUV A Switchers • Introduction

Page 10
Image 10
Extron electronic SW YUV A, SW RGB manual Introduction, cont’d, All models