Sync
Input type | RGBHV (except SW6 YUV A), RGBS, RGsB, RsGsBs |
Output type | RGBHV (except SW6 YUV A), RGBS, RGsB, RsGsBs |
Input level | Analog or TTL, 0.5V to 5.0V |
Output level | 5.0V |
Input impedance | 510 ohms for V input and unselected H input; the selected H input |
| impedance is determined by the device connected to the H output. |
Output impedance | 75 ohms for V output; the H output impedance is determined by the device |
| connected to the selected H input. |
Max input voltage | 5.0V |
Max. propagation delay | 35 ns |
Max. rise/fall time | 4 ns |
Polarity | Positive or negative (follows input) |
Audio — SW 2/4/6 RGBHV A only
Gain | Adjustable |
| When audio gain is set to unity (0 dB), balanced output will have a 0 dB |
| gain; unbalanced output will be attenuated by 6 dB. |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N | >90 dB at rated maximum output |
Crosstalk | |
Stereo channel separation | >80 dB @ 20 Hz to 20 kHz |
CMRR | >75 dB @ _20 Hz to 20 kHz |
Digital audio
Input type | Dolby Digital, DTS, AES/EBU |
Output type | Dolby Digital, DTS, AES/EBU |
Bandwidth | 100 MHz |
Sampling rates | 32, 44.1, 48, 96 kHz |
Input level | 0.5V to 5.0V |
Output level | 2.5V |
Input impedance | 510 ohms for unselected inputs; for the selected input, impedance is |
| determined by the device connected to the output |
Output impedance | Determined bythe device connected to the selected input |
Max input voltage | 5.0V |
Max. propagation delay | 35 ns |
Max. rise/fall time | 4 ns |
Audio input — SW 2/4/6 RGBHV A only
Number/signal type | 2, 4, or 6 (depending on the model) stereo, balanced/unbalanced |
Connectors | 2, 4, or 6 (depending on the model) 3.5 mm captive screw connectors, 5 pole |
Impedance | >10 kohms unbalanced, 20 kohms balanced, DC coupled |
Nominal level | |
| configurable |
Maximum level | +20 dBu, (balanced or unbalanced) at 1%THD+N |
Input gain adjustment |
SW RGB and YUV A Switchers • Specifications and Part Numbers