Extron electronic SWP123 manual Switching commands

Switching commands

	These commands can initiate only a one-input-to-one-output switch.
Command		Description
Execute switch
[MSxOooIii]		Executes the selection of an input for the specified group.
		x = 1 to switch VGA
		x = 2 to switch S-video
		x = 3 to switch Composite Video
		x = 4 to switch Master Audio
		ii = 00 - 04 for input (00 = blank)
		oo = 01 for output 1
Switch current setting
[MSx?]		Returns the current connection for the selected group.
		x = 1 for VGA
		x = 2 for S-video
		x = 3 for Composite Video
		x = 4 for Master Audio
Blank output
[BLANKx]		Blanks a specific output.
		x = 1 for VGA
		x = 2 for S-video
		x = 3 for Composite Video
Audio follow video
[AFVx]		Causes Master Audio to automatically switch to the
		selected video
		group.
		x = 0: Audio Follow Video not enabled
		x = 1: Audio Follow Video enabled
		x = ?: To request current state
Special mode (enable decoder loop)
[SPMx]		For use with decoder loop function where selected
		composite video is routed to S-video channel 4.
		x = 0: Special Mode not enabled
		x = 1: Special Mode enabled
		x = ?: To request current state
	Enabling Special Mode [SPM1]
	turns off Switching Mode (below).
Switching mode select
[SMDx] (Version 1.2 or later)		Change switching mode.

x = 0: Separate switcher mode (VGA, S-video, and Composite are independent)

x = 1: Single switcher mode (VGA, S-video, and Composite are mutually exclusive.)

x = ?: To request current state

Enabling Switching Mode [SMD1] turns off Special Mode (above).

SWP123 Presentation Switcher • Remote Control 5-5