5.9 Image
Function 9 Image is valid only when you have installed a hard disk. This function
includes 6 parts. They are Load, Delete Image, Image Info, Compare Image, Select
Partition and Select Src Drive. The loaded data is called an image file.
Select function 9.
9.Image
5.9.1 Load
On the above figure press ENT , and you will enter the following figure. Here the
function Load is to let you load data from DVD-ROM or any one of the DVD writers
into the current partition of the hard disk. P:A means partition A.
9-01.Image P: A
Load
Press ENT to load. LCD will show the loading information as follows.
Load- A - DVD 0%
4213.4MB d:20:15
Page 13