Detect Drives Copy | EZQuest DVD Duplication guide

Detect Drives

1. Copy

There are 12 functions for you to use. Function 1 is Copy. You can press t to select other functions.

λPlace a source DVD into DVD-ROM.

λ	Switch to function 1 Copy by pressing s . Place blank DVD disks into the
	DVD writers, and press ENT to start copying.

λWhen copying comes to an end, the passed DVDs will eject automatically. The default is eject automatically, but you can change it.

λThe failed DVDs will remain in the writers. The default is keeping failed DVDs in the writers, but you can change it. To take the failed DVDs you need to press the ìejectî buttons on the writers.

Page 4

Image 4

EZQuest DVD Duplication user manual Detect Drives Copy

Contents

EZQuest Duplicators Copyright and Trademark EZQuest Buttons and LCDDVD Duplicator 1-3 ver 2.03K Initialize Sdram Detect Drives Copy Copy Copying- DVD 0% 4213.4MB d2015 Test Copy OKTest Erasing disc Testing- DVD 0% 4213.4MB d2015 Test & CopyTest OK Test & Copy Verify Test & Copy OKVerify Verify- DVD 0% 4213.4MB Compare Verify OKCompare Compare- DVD 0% 4213.4MB Prescan Src 01 DVD-ROM Total 4213.4MBSrc 02 DVD-RW Identical Src 02 DVD-RW TOC not match Disc Info Scaning- DVD 0% 4213.4MBPreScan OK Disc Info Select Source Select SourceSrc DVD-ROM 01 IDE1 Master DVD-ROM selected Image ImageLoad Image Load Image load OK Image Exists Overwrite?YesDelete Image Image P a Delete Image Partition a Image is deleted Image InfoImage Image Info Compare Image Tgt 00 HDD P a Identical Tgt 00 HDD P a TOC not match Select Partition Image P a Select PartitionSelect Working Partition a Set Partition to Edit Track for CD only Image Image Src DriveSelect Img Src Load image from Drive ID-01 Edit Track CD to CDEdit Track CD to CD Edit Select Track 1/10 Select Track End 1Trk0325 End edit disc and burn?YesCopying- 24X Edit 1/10 1/1 Burn Complete Continue edit next Disc?Yes Insert next discSelect Track +2/10 Select Track End 1Trk0425 Copying- 24X Edit 2/10 2/2 Continue edit next Disc?No Close all discís session? Yes Closing Session Please waitCD to HDD Edit Track CD to HDD Edit Load- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Burn or Move to partition?Burn Load- P0 -24X Edit 2/10 2/2Copy- P0 -24X 0% Trk0325 Moving to P a 0% Burn or Move to partition? MoveMoving to P a Play Audio Track Edit Track Play Audio Track Close Session Playing Track-1 0000Edit Track Close Session Setup SetupClosing Complete Fail Setup Language Setup Burn SpeedLanguage English Burn Speed Maximum Setup Read Speed Setup Auto Start DriveRead Speed Maximum Auto Start Drive Off Setup Startup Menu Setup Auto VerifyStartup Menu 1.Copy Auto Verify Off Setup Auto Compare Setup Auto PrescanAuto Compare Off Auto Prescan Off Setup Eject Disc Setup Burn On The FlyEject Disc Eject Disc Eject Good Only Setup Burn Mode Burn ModeNo Valid HDD Setup Button Sound Setup Device InfoButton Sound Device Info Setup System Info DVD-ROM DVD-116DVD-RW DVR-103 System Info Adv Setup Adv SetupAdv Setup UnderRun Protect UnderRun Protect Adv Setup Overburn Adv Setup Read Error SkipRead Error Skip Off Overburn Off Adv Setup Format HDD Adv Setup Verify HDDAll data will be lost, format? Yes There is no HDD Adv Setup Burn-in Verify Disk or Partition? DiskVerify Hard Disk Burn-in Update Firmware Adv Setup Update FirmwareSel burn-in num Run Continuous Burn-in Erase&Copy Adv Setup Compare Firmware 12.9 H/W DiagnosticAdv Setup Diagnostic Searching F/W Load Default Adv Setup Load DefaultLoad Default Config? Yes ≠ ↓ Enter ESC Holde ESC to exit 12.11 CD+G Adv Setup CD+GIsrc About LCD About Error MessagesAbout DVD-ROM/DVD Writers About Firmware Update About ButtonsAbout DVD Writer Not Readable About High Failure Rate About Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Appendix LCD Messages Normal Conditions Connecting with a HDD Verify Disk or Partition? Firmware Update Audio Editing Firmware is updated successfully