Appendix 2 | LCD Messages | |
1. Normal Conditions: |
| |
Initialize SDRAM | Initialize the memory of the system. | |
Detect Drives | Detect what drives are connected with the system. | |
User Abort! | Cancel the job during operation. | |
Analyzing | Analyze the source disc. | |
Source Drive Not Ready | Source drive is not ready to read. | |
Target Drive Not Ready | Target drive is not ready to write. | |
Source Disc Not Ready | Source disc is not ready to be read. | |
Target Disc Not Ready | Target disc is not ready to be written into. | |
Erasing disc | The system is erasing the data on the disc. | |
Fail to get Drive Info! | The drive information cannot be obtained. | |
Fail to get Src Disc Info! | The information of source disc cannot be obtained. | |
Save new config Fail! | The new setting of configuration cannot be saved. | |
Load Default Config? | Do you want to load the default settings? | |
Src&Tgt canít in the same channel......During comparison the source and target
discs cannot be in the same channel. |
| |
Preparing | The system is preparing to record. | |
Check Target Please Wait | The system is checking the target device. | |
Audio Disc!!! Canít compare! | The system cannot compare the audio discs. | |
Identical | The comparison results are the same. | |
Read disc error | During comparison the disc cannot be read. | |
Cannot read TOC | The system cannot read the contents of disc. | |
TOC not match | The comparison results are not the same. | |
Source Disc Empty!!! | The source disc doesnít contain any data. | |
Target overflow | The target disc hasnít enough capacity to store new data. | |
Target Disc Not Empty!!! | The target disc still has data. | |
Page 52
