12.11 CD+G, Adv Setup CD+G, Isrc | EZQuest DVD Duplication instruction

When default loading finishes, LCD will show the results as follows.

Load Default

5.12.11 CD+G

On the above figure press ESC and t to enter the following figure. CD+G is a kind of special copying format. This function supports the special format.

12-11. Adv Setup CD+G

Press ENT to enter the next figure. The default is Off. Press t to select On.

CD+G

Off

5.12.12 ISRC

On the above figure press ESC and t to enter the following figure. ISRC is a kind of special copying format. This function supports the special format.

12-12. Adv Setup

ISRC

Page 46

Image 46

EZQuest DVD Duplication user manual 12.11 CD+G, Adv Setup CD+G, Isrc

Contents

EZQuest Duplicators Copyright and Trademark EZQuest Buttons and LCDDVD Duplicator 1-3 ver 2.03K Initialize Sdram Detect Drives Copy Copy Copying- DVD 0% 4213.4MB d2015 Test TestCopy OK Erasing disc Test OK Testing- DVD 0% 4213.4MB d2015Test & Copy Test & Copy Verify VerifyTest & Copy OK Verify- DVD 0% 4213.4MB Compare CompareVerify OK Compare- DVD 0% 4213.4MB Src 02 DVD-RW Identical PrescanSrc 01 DVD-ROM Total 4213.4MB Src 02 DVD-RW TOC not match PreScan OK Disc InfoScaning- DVD 0% 4213.4MB Disc Info Src DVD-ROM 01 IDE1 Master Select SourceSelect Source DVD-ROM selected Load ImageImage Image Load Delete Image Image load OKImage Exists Overwrite?Yes Image P a Delete Image Image Image Info Partition a Image is deletedImage Info Compare Image Tgt 00 HDD P a Identical Tgt 00 HDD P a TOC not match Select Working Partition a Select PartitionImage P a Select Partition Set Partition to Select Img Src Edit Track for CD onlyImage Image Src Drive Load image from Drive ID-01 Edit Track CD to CD Edit Edit TrackCD to CD Select Track 1/10 Copying- 24X Edit 1/10 1/1 Select Track End 1Trk0325End edit disc and burn?Yes Burn Complete Select Track +2/10 Continue edit next Disc?YesInsert next disc Select Track End 1Trk0425 Copying- 24X Edit 2/10 2/2 Continue edit next Disc?No CD to HDD Close all discís session? YesClosing Session Please wait Edit Track CD to HDD Edit Load- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Burn or Move to partition?Burn Load- P0 -24X Edit 2/10 2/2Copy- P0 -24X 0% Trk0325 Moving to P a 0% Burn or Move to partition? MoveMoving to P a Play Audio Track Edit Track Play Audio Track Close Session Playing Track-1 0000Edit Track Close Session Setup SetupClosing Complete Fail Language English Setup LanguageSetup Burn Speed Burn Speed Maximum Read Speed Maximum Setup Read SpeedSetup Auto Start Drive Auto Start Drive Off Startup Menu 1.Copy Setup Startup MenuSetup Auto Verify Auto Verify Off Auto Compare Off Setup Auto CompareSetup Auto Prescan Auto Prescan Off Eject Disc Setup Eject DiscSetup Burn On The Fly Eject Disc Eject Good Only Setup Burn Mode Burn ModeNo Valid HDD Button Sound Setup Button SoundSetup Device Info Device Info DVD-RW DVR-103 Setup System InfoDVD-ROM DVD-116 System Info Adv Setup UnderRun Protect Adv SetupAdv Setup UnderRun Protect Read Error Skip Off Adv Setup OverburnAdv Setup Read Error Skip Overburn Off All data will be lost, format? Yes Adv Setup Format HDDAdv Setup Verify HDD There is no HDD Verify Hard Disk Adv Setup Burn-inVerify Disk or Partition? Disk Burn-in Sel burn-in num Run Continuous Update FirmwareAdv Setup Update Firmware Burn-in Erase&Copy Adv Setup Diagnostic Adv Setup Compare Firmware12.9 H/W Diagnostic Searching F/W Load Default Config? Yes Load DefaultAdv Setup Load Default ≠ ↓ Enter ESC Holde ESC to exit 12.11 CD+G Adv Setup CD+GIsrc About LCD About Error MessagesAbout DVD-ROM/DVD Writers About DVD Writer Not Readable About Firmware UpdateAbout Buttons About High Failure Rate About Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Appendix LCD Messages Normal Conditions Connecting with a HDD Verify Disk or Partition? Firmware Update Audio Editing Firmware is updated successfully