Test & Copy, Test OK | EZQuest DVD Duplication specification

LCD will show the testing information as follows.

Testing- DVD 0% 4213.4MB d:20:15

When the test comes to an end, LCD will show the results as follows.

2.Test OK: 03

Stopping the test halfway does not affect the DVD disks, but if the DVD-rewriteable disks contain important data, they may be destroyed.

5.3 Test & Copy

Function 3 Test & Copy is to test first and then copy actually.

Select function 3. Put a source DVD onto DVD-ROM and blank DVD disks onto the DVD writers.

3.Test & Copy

Press ENT to start simulation. LCD will show the testing information as follows.

Testing- DVD 0% 4213.4MB d:20:15

Page 7

Image 7

EZQuest DVD Duplication user manual Test & Copy, Testing- DVD 0% 4213.4MB d2015, Test OK

Contents

EZQuest Duplicators Copyright and Trademark EZQuest Buttons and LCDDVD Duplicator 1-3 ver 2.03K Initialize Sdram Detect Drives Copy Copying- DVD 0% 4213.4MB d2015 Copy Erasing disc TestCopy OK Test Test & Copy Testing- DVD 0% 4213.4MB d2015Test & Copy Test OK Verify- DVD 0% 4213.4MB VerifyTest & Copy OK Verify Compare- DVD 0% 4213.4MB CompareVerify OK Compare Src 02 DVD-RW TOC not match PrescanSrc 01 DVD-ROM Total 4213.4MB Src 02 DVD-RW Identical Disc Info Disc InfoScaning- DVD 0% 4213.4MB PreScan OK DVD-ROM selected Select SourceSelect Source Src DVD-ROM 01 IDE1 Master Image Load ImageImage Load Image P a Delete Image Image load OKImage Exists Overwrite?Yes Delete Image Compare Image Partition a Image is deletedImage Info Image Image Info Tgt 00 HDD P a TOC not match Tgt 00 HDD P a Identical Set Partition to Select PartitionImage P a Select Partition Select Working Partition a Load image from Drive ID-01 Edit Track for CD onlyImage Image Src Drive Select Img Src Select Track 1/10 Edit TrackCD to CD Edit Track CD to CD Edit Burn Complete Select Track End 1Trk0325End edit disc and burn?Yes Copying- 24X Edit 1/10 1/1 Select Track End 1Trk0425 Continue edit next Disc?YesInsert next disc Select Track +2/10 Continue edit next Disc?No Copying- 24X Edit 2/10 2/2 Edit Track CD to HDD Edit Close all discís session? YesClosing Session Please wait CD to HDD Load- P0 -24X Edit 1/10 1/1 Continue edit next Disc?Yes Burn or Move to partition?Burn Load- P0 -24X Edit 2/10 2/2Copy- P0 -24X 0% Trk0325 Moving to P a 0% Burn or Move to partition? MoveMoving to P a Edit Track Play Audio Track Play Audio Track Close Session Playing Track-1 0000Edit Track Close Session Setup SetupClosing Complete Fail Burn Speed Maximum Setup LanguageSetup Burn Speed Language English Auto Start Drive Off Setup Read SpeedSetup Auto Start Drive Read Speed Maximum Auto Verify Off Setup Startup MenuSetup Auto Verify Startup Menu 1.Copy Auto Prescan Off Setup Auto CompareSetup Auto Prescan Auto Compare Off Eject Disc Eject Good Only Setup Eject DiscSetup Burn On The Fly Eject Disc Setup Burn Mode Burn ModeNo Valid HDD Device Info Setup Button SoundSetup Device Info Button Sound System Info Setup System InfoDVD-ROM DVD-116 DVD-RW DVR-103 UnderRun Protect Adv SetupAdv Setup Adv Setup UnderRun Protect Overburn Off Adv Setup OverburnAdv Setup Read Error Skip Read Error Skip Off There is no HDD Adv Setup Format HDDAdv Setup Verify HDD All data will be lost, format? Yes Burn-in Adv Setup Burn-inVerify Disk or Partition? Disk Verify Hard Disk Burn-in Erase&Copy Update FirmwareAdv Setup Update Firmware Sel burn-in num Run Continuous Searching F/W Adv Setup Compare Firmware12.9 H/W Diagnostic Adv Setup Diagnostic ≠ ↓ Enter ESC Holde ESC to exit Load DefaultAdv Setup Load Default Load Default Config? Yes 12.11 CD+G Adv Setup CD+GIsrc About LCD About Error MessagesAbout DVD-ROM/DVD Writers About High Failure Rate About Firmware UpdateAbout Buttons About DVD Writer Not Readable About Function 12 and Cancellation Appendix 1 List of Functions Adv Setup Normal Conditions Appendix LCD Messages Verify Disk or Partition? Connecting with a HDD Audio Editing Firmware Update Firmware is updated successfully