Press ENT to enter the following figure. The default is On. Press t to select Off.
Burn On The Fly
On
If your copy smart plus doesnít connect with a hard disk, LCD will show the message as follows.
No Valid HDD !
5.11.11 Burn Mode
On the above figure press ESC to return to Function 11, and then select part 11 Burn Mode as the following figure shows. Burn Mode lets you control the burning modes. There are two modes: DAO (Disc At Once) and TAO (Track At Once). They only supports CD. If the DVD writer doesnít support the mode you have selected, the copy smart plus will automatically switch to another mode.
11-11. Setup
Burn Mode
Press ENT to enter the next figure. The default is DAO. Press t to select TAO.
Burn Mode
DAO
Page 36
