EZQuest DVD Duplication user manual ≠ ↓ Enter ESC Holde ESC to exit, Test finished, Load Default

Press ENT to enter the next figure. Follow the instructions on LCD to do the button test. After that, the system will do the self-test of SDRAM, the hardware connection test and flash test. All test results will be shown on LCD. It is the easiest way to know if the system can work well.

≠↓ Enter ESC

Holde ESC to exit

When the whole process finishes, LCD will show the message as follows.

Test finished

5.12.10 Load Default

On the above figure press ESC and t to enter the next figure. Load Default is to make all changed settings recover to defaults.

12-10. Adv Setup

Load Default

Press ENT to enter the next figure. Use s t to confirm Yes or No.

Load Default

Config? Yes

Page 45