2.At the back of the oven you will find cable “A” which is used to make the electrical connection in this way:
Black color wire(PHASE)
White color wire(NEUTRAL)
WARNING: before starting to make any connections, check the following:
•that the mains voltage corresponds to the voltage indicated on the feature identification plate B, figure 2.
•that the electrical mains the oven is to be connected to is powerful enough for the maximum power the oven absorbs, indicated on the feature identification plate.
ELECTRICAL SPECIFICATIONS
Model | Volts |
Watts
Amps
240
3,6 KW
15
3.After it is plugged in, place the oven into the gap, taking special care not to leave any surplus cable on top of the oven.
4.A switch must be placed in the most accessible site possible in order to disconnect the oven, with a minimum of 3 mm between the contacts.
5.Fasten the oven to the unit with the 2 screws you will find in the bag of accessories.
B
6.If the cooking function selector is not at position “0”, turn it to “0” and set the time on the oven.
10
