B.About Moisture Condensation
C.Unpacking and Inspection
.
If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside the unit. Should this occur, print quality may not be optimum. Leave the unit turned off in a warm, dry room for several hours before using. This will allow the moisture to evaporate.
While unpacking your printer, inspect the carton to ensure that no damage has occurred during shipping. Make sure that all supplied accessories are included with your unit. The following items should be included with your PrimeraPro Color Printer:
■Printer
■Power Transformer
■Sample Media Kit
■Wax Thermal Starter Ribbon (30 Prints)
■
■Paper Output Tray
■Ribbon Cartridges (2)
■Printer Driver Diskette (3.5"). Contact FARGO Technical Support for an optional 5.25" driver diskette.
■Warranty Statement and Registration Card
■This manual and other printed information
Save the carton and packing materials. They will come in handy when transporting the unit or shipping it for service.
13