FARGO electronic 76500, 76505, 76501, 76502 Paper wonÕt feed and the On Line LED starts blinking

The paper wonÕt feed and the On Line LED starts blinking.

My printing gets cut off at the bottom (or on the right side in Landscape mode).

Symptoms: printer starts to make noise like everything is fine, but no paper feeds.

■Push the paper or transparencies in all the way. If inserting a stack of standard A-size paper, for example, the paper should be pushed into the printer until the head of the arrow on the fully- extended Paper Input tray is visible.

■YouÕre trying to feed media thatÕs too thick or too heavy. Try a lighter weight paper or transparency sheet.

■The in-feed rollers are extremely dirty. Refer to Section 10 for cleaning instructions.

■Be sure the internal paper guide, as described on page 23, is set to the proper A or A4 paper size setting.

Symptoms: the bottom part of your really great graph, chart or image is gone.

■Remember, there is an unprintable area at the bottom of all media thatÕs approximately 1.20Ó (30.5mm). This is necessary so that the printer can feed the paper back and forth for color printing. Use a longer sheet of paper or transparency film to increase print area or reduce the image size from within the software program youÕre using.

■Check that the correct paper size and length is selected in the printer driver. Improper paper size settings will always send your image to the wrong area of the page. (See page 24 for important paper size information)

■If using the perf paper, T-shirt transfer paper, or transparencies, you need to have the paper size in the printer driver setup set to Letter Long (Windows and Macintosh) or U.S. Legal (Amiga).

75