FARGO electronic 76503, 76505, 76501 Open the printerÕs top cover with the Cover Release Lever

68

1.Open the printerÕs top cover with the Cover Release Lever.

2.Remove the Ribbon Cartridge from the printer. (The Ribbon Cartridge should also be cleaned by wiping out each end of the cartridge with a moist cloth. This will prevent dust buildup.)

3.Remove the Paper Output Tray.

4.Remove the screw on the front of the printer, located just above the Paper Output Tray.

5.Gently pull out the Output Assembly. It will only pull out about two inches. Clean inside the opening and remove any debris that may be inside.

6.If you have access to a very small vacuum cleaner (most computer stores sell devices just for this purpose), use it to vacuum out all visible areas inside the printer. If you donÕt have such a device, use a soft, lint-free rag slightly moistened with isopropyl alcohol to wipe out all visible areas inside the printerÕs cabinet. Be extremely careful not to let any alcohol drip inside the printerÕs case.

7.Re-install the Output Assembly, the Paper Output Tray, and replace the screw.