FEIN Power Tools WSG15-70LNOX/N09 Symbols, abbreviations and terms used, Character, Explanation

OBJ_BUCH-0000000123-002.book Page 19 Tuesday, August 13, 2013 9:40 AM

en 19

Original Instructions.

Symbols, abbreviations and terms used.

Symbol, character	Explanation
	General prohibition sign. This action is prohibited.
	Do not touch the rotating parts of the power tool.
	Observe the instructions in the text or graphic opposite!
	Make sure to read the enclosed documents such as the Instruction Manual and the General
	Safety Instructions.
	Before commencing this work step, pull the mains plug out of the socket. Otherwise there will
	be danger of injury if the power tool should start unintentionally.
	Use eye protection during operation.
	Use ear protection during operation.
	Use protective gloves during operation.
	A surface that can be touched may be very hot and thus hazardous.
	Gripping surface
	Additional information.

Confirms the conformity of the power tool with the directives of the European Community.

WARNING	This sign indicates a possible dangerous situation that could cause severe or fatal injury.
	Worn out power tools and other electrotechnical and electrical products should be sorted
	separately for environmental-friendly recycling.
	Product with double or reinforced insulation
	Low speed
	High speed

Character	Unit of measure-	Unit of measure-	Explanation
	ment, international	ment, national
n	/min, min-1, rpm,	rpm	Rated speed
	r/min
P1	W	W	Power input
P2	W	W	Output
U	V	V	Rated voltage
f	Hz	Hz	Frequency
M...	mm	mm	Size of metric thread
Ø	mm	mm	Diameter of a round part
	mm	mm	ØD =Max. diameter of grinding/cutting disc
			ØH=Diameter of mounting hole
			T=Thickness of grinding/cutting disc
	mm	mm	ØD =Max. sanding pad diameter