Setting Up
Model 8800 User's Manual
MOUNTING A CAMERA
1Select the position for the camera and secure the camera stand. (Use an appropriate screw type for the mounting surface.)
2Screw the camera onto the stand. Tighten the lock nut.
thumb screw
lock nut
3Adjust camera to the proper view angle. Make sure the lens is upright relative to the subject. Tighten the thumb bolt.
INSTALLING AND CONNECTING THE CAMERAS AND DVR
1Connect the camera video connector into the BNC cable (supplied).
2Connect the BNC connector on the other end of the cable to the video input on the DVR.
3Plug the camera power connector into the BNC cable.
4Plug the other end of the camera power cable into one of the camera splitter connectors.
5Plug the camera power connector from the 12V DC power supply adapter into the splitter.
6Plug the DVR power connector from the 12V DC power supply adapter into the power input on the rear panel of the DVR.
7Plug the power supply cord from the two adapters into an electrical outlet.
