Getting Started

Model 8800 User's Manual

VIDEO PLAYBACK

To playback a recorded video, click the Record Search icon on the Tool Bar.

Use the Video Playback menu to select the date/time and channel you wish to view. See Chapter 5, DVR Settings for descriptions of the playback settings.

To playback a certain video feed from a particular camera, indicate the time and camera from which you want to receive information. If using the remote, navigate between fields

using the buttons and modify the time using the ▲and ▼buttons. Press ENTER to confirm your selection.

Using the mouse, position the cursor over the field and use the navigation buttons to modify the values. After selecting the day, click SEARCH to locate the recordings from that day.

Select the Start and Stop time on the time line positioned against the available channels (choose the channel to view by selecting the checkbox next to each channel). Up to four channels can be selected for playback. The start and stop times of the recording are indicated by two vertical lines on the time line. If using the remote control, go to the desired line using navigation buttons. To fine-tune the required time, use the

buttons to zoom in/out of the time line, or use the buttons to move along the time line. Time values will display above the time line.

Using the mouse, left-click once to set up the start time, then left-click to indicate the stop time. Right-click to cancel the marked time.

The available recordings will be represented by colored bars on the time line depending on the type of recording (blue = common, green = motion detection triggered, red = alarm triggered, and grey = manually made).

16

Page 22
Image 22
First Alert 8800 user manual Video Playback