Getting Started
Model 8800 User's Manual
1. Select the preset number you want to clear or reset.
2. Click the Clear button.
Sequence Procedures
To set a sequence:
1. Select preset number.
2. Click the Set button.
3. Repeat steps 1 and 2 to add more presets if needed.
4. Click the Run button.
To clear a sequence:
1. Click the Clear button to clear sequence.
Track Procedures
To set a track:
1. Click on the track button to start.
2. Move camera in the pattern you want it to run.
3. Click the track button again to finish the track setup.
4. Click the run button to run track. Click again to stop running.
5. Click the clear button to clear the track sequence.
Use the screen view button on the Tool Bar to switch between single- and multiple-screen
views depending on the number of cameras installed. .