Remote Access
remote surveillance
Mobile Phone
setup and control
SETTING
You can check and change the parameter settings as configured in the DVR
1.BANDWIDTH: Set the bandwidth in kbps (128k, 192k, 256k, 384k, 512k, 1024k) that you want to allocate for traffic based on internet bandwidth available. This bandwidth does not include audio.
2.FILE SAVE PATH: The path where you want to save captured picture and recording video.
MAINTENANCE
You can check and change the parameter settings as configured in the DVR along with rebooting the system and upgrading firmware.
1.TELECONTROL: Remote reboot DVR or format HDD.
2.REMOTE UPGRADE: Remote upgrade DVR firmware.
Mobile Phone
Mobile Setup
Mobile allows you to send alerts to your cellular phone running Windows Mobile Pro (6.0 or later), Symbian (S60 3rd or later), Android, Blackberry (Curve 8900, Bold 9700, Tour 9630), or iPhone on 3G networks. The instructions on how to install and use the software for the different phone operating systems are shown below. This installation CD includes the software needed for Windows Mobile Pro, Symbian, Android, and Blackberry. To use with an iPhone you need to download the software from the iTunes app store.
For all phones configure MOBILE settings as follows:
1.From the MAIN Menu click ADVANCED then MOBILE.
2.Under MOBILE NETWORK, select 3G, 2.75G, or 2.5G. NOTE: Contact your cellular provider if you are unsure about the network of your cellular phone.
3.Under MOBILE PORT, enter your mobile port number. Note: this port can’t be the same with any other port and different DVR’s should have different sever ports.
4. Click APPLY. Click OK in the confirmation window. | Mobile Setup |
5.Click EXIT in all menus until all windows are closed.
Mobile Access
Remote Setup - Setting Screen | Remote Setup - Maintenance Screen |
HOST INFO
This interface allows you to view system information such as HDD status, remain record time, firmware version and MAC Address. All the information is for viewing only and cannot be changed remotely.
Remote Setup - Host Info Screen
NOTE! Before you can use Mobile Access you need to setup the network configuration on the DVR and forward port 100 as described in the “Port Forwarding” section of this manual.
Windows Mobile Pro (6.0 or later) OS Phones
Step 1: Program Download | Step 2: Select Install Path | Step 3: Install Program |
Copy the installation program | Click the program and start to | Click the Install button to begin |
“Meyesetup.CAB” from the | install it, just select default path | installation. |
Installation CD to the “My | when it ask you to select install |
|
Documents” folder on your mobile | path. |
|
phone. |
|
|
|
|
|
|
|
|
Download Software | Select Install Path | Install Software | |||
Page 40 | Page 41 |
