Installation instructions
Fitting the front feet
Note: Dryer is usually supplied with feet fitted and protruding the correct distance.
1Tilt the dryer back using a hand trolley and making sure the trolley and dryer are secure.
2 Fit a rubber insert to each plastic foot as shown.
Fig.17 Inserting rubber inserts
3Screw the feet into the foot retainers on the left hand and right hand sides as shown.
19
EN
Fig.18 Adjusting feet
4 Screw both feet in so they protrude ½” (12 mm) below the bottom of the wall on the foot retainers.
Fig.19 Final foot position
