|
| vi |
|
| C.1.2 | High Temperature | 51 |
| C.1.3 | Temperature Fluctuating | 51 |
| C.1.4 | Excessive Water In Circuit | 51 |
| C1.5 | Low humidity | 52 |
| C1.6 | Alarms | 52 |
| C1.7 | Temperature display | 53 |
| C1.8 | Breathing circuit leak | 53 |
| C1.9 | External water leak | 53 |
| C1.10 | LED on | 53 |
C2 | MR700 Series Fault Flow Chart For No Go Condition | 54 | |
APPENDIX D | ............................................................................................................................................... | 55 | |
D1 | Cleaning of Humidifier Heater Bases | 55 | |
D2 | Cleaning of Airway Temperature Probes | 55 | |
APPENDIX E | 56 | ||
e1 | Additional Dynamic Performance Check of Humidifiers | 56 | |
E2 | Performance Check MR730/720/700 | 56 | |
| E2.1 | Equipment Setup | 56 |
| E.2.2 | Setup | 56 |
| E.2.3 | Dynamic Test Sequence (MR730/720/700) | 57 |
E.3 | Performance Check (MR480) | 57 | |
| E.3.1 | Equipment Setup | 57 |
| E.3.2 | Setup | 58 |
| E.3.3 | Dynamic Test Procedure (MR480) | 58 |
Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001
