Power Recorder

Safety Information

Safety Information

See the Specifications section for a full agency compliance list. Table 1 lists symbols that appear on the Recorder and in this manual.

XW Warning

To prevent possible electrical shock, fire, or personal injury:

Carefully read all instructions.

Do not work alone.

Do not use the Product around explosive gas, vapor, or in damp or wet environments.

Use only insulated current probes, test leads, and adapters as supplied with the Product.

Examine the case before you use the Product. Look for cracks or missing plastic. Carefully look at the insulation around the terminals.

Remove all probes, test leads, and accessories that are not necessary for the measurement.

Make sure the ground conductor in the mains power cord is connected to a protective earth ground. Disruption of the protective earth could put voltage on the chassis that could cause death.

Only use probes, test leads, and accessories that have the same measurement category, voltage, and amperage ratings as the product.

Do not use exposed metal BNC or banana plug connectors.

Do not put metal objects into connectors.

Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is possible.

There are no user-replaceable parts in the Product. Have an approved technician repair the Product.

Use the Product only as specified, or the protection supplied by the Product can be compromised.

3

Page 11
Image 11
Fluke 1750 specifications Safety Information, XW Warning