1750
Operators Manual
Setting Up the Recorder | 38 |
Setting the Clock | 40 |
Probe Detect | 40 |
Setting the IP Address | 41 |
Adding a Measurement Description | 41 |
Configure Nominal Power Values | 42 |
Using Phase Swap | 42 |
Setting the Volts and Current Ratio | 43 |
Assign Recorder Name and Password | 43 |
Setting the Snapshot Period - Periodic Waveform Capture Setting | 44 |
Change Display Language and Phase Identifier | 45 |
Working with Annotations | 45 |
Using Image or Voice Annotations | 47 |
Inserting Image or Voice Annotations | 47 |
Turn off the Recorder | 48 |
Cleaning and Maintenance | 48 |
Regulatory Information for Wireless Communication | 49 |
Specifications for the System: Recorder and Power Analyze Software | 50 |
General Specifications | 50 |
Input Specifications | 50 |
Synchronization and Sampling | 50 |
Voltage and Current Measurements | 50 |
Voltage and Current Measurement Accuracy | 51 |
Transient Voltage (Impulse) | 51 |
Dip (Sag) and Swell Measurements | 51 |
Power and PF Measurement | 51 |
External Interface Specifications | 52 |
Environmental and Safety Specifications | 52 |
ii