1750

Operators Manual

Azd132.bmp

Setting the Snapshot Period - Periodic Waveform Capture Setting

Use the Snapshot Period screen to program the Recorder to take automatic power conditions readings which are then stored in the recorded data stream. These snapshots contain a phasor diagram, waveforms of current and voltage, harmonics profiles, and other data.

None

10 minutes

30 minutes

1 hour

Note

You can take a snapshot manually at any time at any time while connected over the wireless link to a Recorder. Press the Waveform icon on any of the View screens to take a snapshot. The message, “Snapshot Acquired” confirms that a snapshot was taken.

Azd135.bmp

44

Page 52
Image 52
Fluke 1750 specifications Azd132.bmp