1750

Operators Manual

Meter Screen

The Meter screen shows numeric readings for all selected phases.

Azd122.bmp

Phasor Screen

The Phasor screen shows voltage (long arrows with solid arrowheads), current amplitudes, and phase angles. This screen is used to verify proper test lead and current probe connections. You can use the V and A arrows on the upper right of the screen to change the scaling of voltage and current on the PHASOR diagram.

You can easily correct an erroneous Recorder connection by going directly to Menu\1750 Setup\Phase Swap () and using the Recorder to internally invert a CT, swap a voltage or CT phase, or modify a scaling parameter, then return to the screen to verify that the correction has been made. There is no need to touch the cables. See “Phase Swap” later in the manual for additional information.

Azd123.bmp

36

Page 44
Image 44
Fluke 1750 specifications Meter Screen, Phasor Screen