Introduction 1

Safety Information

A WCaution identifies conditions and actions that could damage the camera or cause permanent loss of data.

WCaution

•To avoid damaging your Camera, treat it with care as you would any type of precision equipment.

•Your infrared camera is a precision instrument that uses a sensitive infrared (IR) detector. Pointing your camera towards highly-intense energy sources—including devices that emit laser radiation and reflections from these devices—may adversely affect camera accuracy and may harm or permanently damage your camera’s IR detector.

•Your camera was calibrated prior to shipping. We recommend that you have your camera checked for proper calibration every two years. Some ISO 9000 programs require more frequent checks for certification. Contact Fluke for details.

•Your camera requires three minutes to warm up before accurate measurements are available.

*WWarning

•Your camera contains a Class 2 laser pointer. See diagram in Appendix B for laser aperture location.

•To avoid eye damage, do not point laser directly at eye or indirectly off reflective surfaces.

•Use of controls or adjustments or performance or procedures other than those specified herein may result in hazardous laser radiation exposure.

•Do not use camera in a manner not specified in this manual or the protection provided by the equipment may be impaired.

1-3