|
|
|
| Appendices | B |
|
|
|
| Troubleshooting | |
|
| Table |
| ||
|
|
|
|
|
|
| Symptom |
| Possible Reason | Possible Solution |
|
|
|
|
|
| |
| Camera will not |
| The Compact | Insert new | |
| save an image. |
| Flash memory | Flash memory card, delete |
|
|
|
| card is full. | unnecessary images from the card | |
|
|
|
| (see Chapter 3), or transfer the |
|
|
|
|
| images saved on the card to a |
|
|
|
|
| computer hard drive and/or other |
|
|
|
|
| back up storage device (e.g., | |
|
|
|
| disc). |
|
|
|
|
|
| |
| The approximate |
| The temperature | Change the temperature calibration | |
| sign (~) appears |
| reading is outside | range; See Setting Temperature |
|
| in front of a |
| the selected | Calibration Range, in Chapter 6. |
|
| temperature |
| calibration range |
|
|
| reading. |
| and the accuracy |
|
|
|
|
| may not be within |
|
|
|
|
| the specified |
|
|
|
|
| accuracy of the |
|
|
|
|
| camera. |
|
|
|
|
|
|
|
|
If you are unable to solve the problem using the possible solutions in the Troubleshooting table:
Reboot the camera by pressing Dto power off the camera, then pressing
Dagain to power on the camera. If this still does not correct the issue: Contact Fluke as described in Chapter 1.