Ti40, Ti45, Ti50, Ti55
Users Manual
Creating an Isotherm Temperature BandNote
This feature is available only on Ti45 and Ti55 cameras without IR Fusion.
You can add an isotherm temperature band to an image to highlight areas of equal temperature. The image pixels that fall within the isotherm span you set appear in a color different from the palette colors. You can specify the span using either the maximum and minimum temperatures or the center point temperature and span width.
To create an isotherm temperature band:
1.Tap F.
2.Use the MOUSE controller to position the pointer over Image Settings on the pop up menu.
3.Tap E.
4.Position the pointer over the Iso. tab and tap E.
5.Position the pointer over the Enable Isotherm box and tap E. A check mark indicates the feature is enabled.
6.Position the pointer over either the Max/Min or Center/Width left/right and tap Erepeatedly as needed to increase/decrease the isotherm span settings.
7.Tap the TRIGGER button to accept setting change and return to scan target mode.
Note
The isotherm’s temperature limits are indicated next to the color palette on the display screen. To adjust these isotherm temperature limits:
1.Position the pointer on over the isotherm temperature limit you want to change, then tap Eto highlight the value.
2.Use the MOUSE controller up/down action to change the value.
3.When you reach the desired temperature, tap the TRIGGER button to accept setting change and return to scan target mode.