Introduction 1

Capturing an Image

Mouse Controller

F2

F2

F3

Level & Span

eii007.eps

Figure 1-7. Setting the Fusion Blend Level

Capturing an Image

1.Tap the TRIGGER button once (shown in Figure 1-8) to pause the live image.

2.Review the image and camera settings.

3.Press and hold the TRIGGER button for 2 seconds to capture (save) the image. The image file name appears in the upper left-hand corner of the display screen indicating the image is saved on the memory card.

Note

The memory card must be inserted into the camera to save and store images.

4.Tap the TRIGGER button to return to scan target mode.

1-11