Camera Care 8

Charging the Batteries

The Battery tab within the Camera Info window shows the power source, remaining battery charge level, and battery manufacturer, serial number, and number of discharge cycles.

To view the Battery tab information:

1.Tap F.

2.Use the MOUSE controller to position the pointer over Camera Info on the popup menu and tap E.

3.Position the pointer over the Battery tab and tap E.

4.Tap the TRIGGER button to return to scan target mode.

Charging the Batteries

Your Camera comes with a battery charger that works with 100 to 240 V AC input voltage and 50 or 60 Hz input frequency. The charger has a recalibration feature to maintain correct capacity monitoring. When using battery power, a battery symbol appears in the far right side of the camera display screen task bar. The remaining charge capacity is indicated as shown in Table 8-1.

Table 8-1. Remaining Battery Charge Indicators

Indicator

Battery Power Remaining

 

 

Green

25% to 100%

 

 

Yellow

Less than 25%

 

 

Flashing/Solid Red

Approximately 5 minutes until camera

 

powers off.

 

 

Use the MOUSE controller to position the pointer over the battery icon. Press

Eto obtain an estimate of the remaining battery charge and camera runtime.

8-3