Ti40, Ti45, Ti50, Ti55

Users Manual

Color alarm thresholds and range limits can be adjusted using the display screen menu.

Note

Color alarms work in both full screen and picture-in-picture view. With the onscreen alarm disabled, the entire infrared image is blended with the visible light image according to the IR Fusion blend setting and palette selection. The IR Fusion blend setting should include some IR (i.e., not full VL) so that the color alarm is visible on the display screen, provided objects in the scene meet the color alarm criteria. The color alarm function replaces the isotherm function on models with the visible light camera module.

Using Menu to Adjust Color Alarm Ranges

To enable/disable onscreen alarm:

1.Tap F.

2.Use the MOUSE controller to position the pointer over Image Settings on the popup menu and tap E.

3.Position the pointer over the Color Alarms tab and tap E. You may need to position the pointer over the right or left arrow and tap Eto scroll to the Color Alarms tab.

4.Position the pointer over the Enable Onscreen Alarm box; tap Eto add or remove a check mark. A check mark indicates the function is enabled.

5.Tap the TRIGGER button to accept setting change and return to scan target mode.

To set color alarms for temperatures either inside or outside of the specified temperature range:

6.Follow steps 1-4.

7.Position the pointer over the “Temperatures Are Inside Specified Range” checkbox; tap E. A check mark indicates that temperatures within the range will be used.

8.If you have selected “Alarm Outside Range,” position the pointer over the Max or Min box as desired; tap Eto add or remove a check mark. A check mark indicates the function is enabled.

5-8