Camera Care 8

Conserving Battery Power

Note

Recalibration may take up to 16 hours. You can charge a battery in the right charging bay while recalibrating a battery in the left bay.

To recalibrate a battery:

1.Insert the battery into the left bay of the battery charger.

2.Press the recalibrate button on the front of the charger.

Conserving Battery Power

To conserve battery power (when the camera is running on battery power, not AC power), the display screen automatically powers off and the system goes into standby mode when the system has been idle for 5 minutes (you can change this time). The camera automatically powers off when the system has been in standby for 10 minutes (you can change this time). You can manually switch to standby mode as well.

To manually switch from full power to standby mode, tap Donce. D flashes green.

To switch from standby mode to full power, tap Donce again. D remains solid green.

To power on or off, press and hold Dfor 4 seconds. Dremains solid green when power on; no light when power off.

To change the standby timeout time:

1.Tap F.

2.Use the MOUSE controller to position the pointer over Camera Settings on the popup menu.

3.Tap E.

4.Position the pointer over the Power tab and tap E.

5.Position the pointer over the Standby Timeout down arrow and press E.

6.Position the pointer over the time you want and press E

7.Tap the TRIGGER button to accept setting change and return to scan target mode.

8-5