Fluke Ti40, Ti45, Ti50, Ti55 Set Temperature Level and Span, Set IR Fusion Blend Level - Ti45, Ti50, Ti55 with Fusion

Ti40, Ti45, Ti50, Ti55

Users Manual

Set Temperature Level and Span

1.Press Gas shown in Figure 1-6 to automatically set the camera’s temperature level and span.

2.Press Gagain as needed to properly scale the image.

Level & Span

eii006.eps

Figure 1-6. Setting the Level and Span

Set IR Fusion Blend Level - Ti45, Ti50, Ti55 with Fusion

1.Press and hold Guntil the IR Fusion blend level control box appears on the display screen.

2.While continuing to press G, use the MOUSE controller shown in Figure 1-7 to slide the IR Fusion blend level bar in the control box to the desired setting.

3.Tap the TRIGGER button to retain settings.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

1-10 FAX 781.665.0780 - TestEquipmentDepot.com