Fortinet FortiGate-5000 manual Physical description of the FortiGate-5140 chassis

Physical description of the FortiGate-5140 chassis FortiGate-5140-R chassis

The power entry modules are hot swappable, which means you can remove and replace a defective PEM while the FortiGate-5140 is operating assuming that the FortiGate-5140 system has both PEMs connected to DC power for redundancy.

The back panel also includes the back cable tray, an ESD socket and the chassis ground connector. The ground connector must be connected to Data Center ground. Use the back cable tray for securing and managing DC power, RTN, and ground wires.

Physical description of the FortiGate-5140 chassis

The FortiGate-5140 chassis is a 12U chassis that can be installed in a standard 19-inch rack. Table 2 describes the physical characteristics of the FortiGate-5140 chassis.

Table 2: FortiGate-5140 chassis physical description

Dimensions	21 x 19 x 20.6 in. (53.3 x 48.3 x 52.4 cm)
	(Height x Width x Depth)
Shipping weight	110 lb. (50 kg)
completely assembled
with packaging
Operating environment	Temperature: 32 to 104°F (5 to 45°C)
	Relative humidity: 5 to 85% (Non-condensing)
Storage environment	Temperature: -13 to 158°F (-25 to 70°C)
	Relative humidity: 5 to 85% (Non-condensing)
Power consumption	Maximum: 2,980W DC
Power input	2x redundant -37VDC to -72VDC, 30A per power feed (total 4 + 4
	power feeds)

FortiGate-5000 Series Introduction

1801-30000-83466-20090108http://docs.fortinet.com/ • Feedback