Front panel LEDs and connectors | FortiGate-5001A security system |
Figure 11: FortiGate-5001A-DW front panel
Double-width AMC opening
Retention
Screw
Extraction
Lever
RJ-45 Fabric and Base
Console network activity
USB LEDs
| | | Retention |
port1 and port2 | IPM | ACC | Screw |
LED | OOS | Extraction |
10/100/1000 | (board | Power | Lever |
Copper Interfaces | position) | Status | |
| | LEDs | |
Figure 12: FortiGate-5001A-SW front panel
Single-width AMC opening
5001A-SW
Retention
Screw
Extraction
Lever
RJ-45 Fabric and Base
Console network activity
USB LEDs
| | | Retention |
port1 and port2 | IPM | ACC | Screw |
LED | OOS | Extraction |
10/100/1000 | (board | Power | Lever |
Copper Interfaces | position) | Status | |
| | LEDs | |
The FortiGate-5001A board includes the following features:
•Two front panel 10/100/1000Base-T copper 1-gigabit ethernet interfaces.
•Two base backplane 1-gigabit interfaces (base CH0 and Base CH1 on the front panel and base1 and base2 in the firmware) for HA heartbeat and data communications across the FortiGate-5000 chassis backplane.
•Two fabric backplane interfaces (Fabric CH0 and Fabric CH1 on the front panel and fabric1 and fabric2 in the firmware) for HA heartbeat and data communications across the FortiGate-5000 chassis backplane. The fabric backplane interfaces operate at 1 Gbps. If you install a FortiGate-RTM-XB2 module the fabric backplane interfaces operate at 10 Gbps.
•One double-width AMC opening (FortiGate-5001A-DW board).
•One single-width AMC opening (FortiGate-5001A-SW board).
•RJ-45 RS-232 serial console connection.
•2 USB connectors.
•Mounting hardware.
•LED status indicators.
Front panel LEDs and connectors
From the FortiGate-5001A font panel you can view the status of the front panel LEDs to verify that the board is functioning normally. You also connect the FortiGate-5001A board to your network through the front panel 10/100/1000 ethernet connectors. The front panel also includes the RJ-45 console port for connecting to the FortiOS CLI and two USB ports. The USB ports can be used with any USB key for backing up and restoring configuration files. For information about using the using a USB key with a FortiGate unit, see the FortiGate-5000 Series Firmware and FortiUSB Guide.
| FortiGate-5000 Series Introduction |
34 | 01-30000-83466-20090108 |
