Fortinet FortiGate-5000 FortiGate-5020 back panel, FortiGate-5020 physical description Dimensions

FortiGate-5020 back panel FortiGate-5020 chassis

FortiGate-5020 back panel

Figure 10 shows the back of a FortiGate-5020 chassis. The chassis back panel includes two redundant AC power connectors and provides access to the hot swappable cooling fan tray. Each AC power connector includes a 25 Amp circuit breaker that also functions as the on/off switch for the AC power connector. You can use the power wire fixtures to secure AC power wires to prevent the power wires from being accidently disconnected.

Figure 10: FortiGate-5020 chassis back panel

Circuit	Circuit
breaker	breaker
AC power	AC power
connector	connector

Hot swappable	Power	Power
cooling fan tray	wire	wire
	fixture	fixture

Physical description of the FortiGate-5020 chassis

The FortiGate-5020 chassis is a 4U chassis that can be installed in a standard

19-inch rack. Table 6 describes the physical characteristics of the FortiGate-5020 chassis.

Table 6: FortiGate-5020 physical description

Dimensions	5.25 x 17 x 15.5 in. (13.3 x 43.2 x 39.4 cm)
	(H x W x D)
Weight	35.5 lb. (16.1 kg)
Operating environment	Temperature: -13 to 158 °F (-25 to 70°C)
	Relative humidity: 5 to 95% (Non-condensing)
Storage environment	Temperature: -20 to 80°C
	Relative humidity: 5 to 95% (Non-condensing)
Power dissipation	Maximum: 800 watts
Power input	2x redundant 110 to 250 VAC

	FortiGate-5000 Series Introduction
32	01-30000-83466-20090108