Fortinet FortiGate-5000 manual FortiGate-5050 chassis back panel, Weight

FortiGate-5050 chassis Physical description of the FortiGate-5050 chassis

Figure 8: FortiGate-5050 chassis back panel

RTM

slot filler

panels

RTN

5

4

3

2

1

RTN

Ground
Connector	GND
(green)
Power
wire

		INPUT A			INPUT B
-48V	DC VOLTAGE RANGE		-48V	DC VOLTAGE RANGE
	-48V	TO -58V		-48V	TO -58V
	RTN	(-DC IN)		RTN	(-DC IN)
		25			25
		AMP			AMP
Positive		-48V to -58V	Positive		-48V to -58V
(RTN)		(-DC in)	(RTN)		(-DC in)
		(black)			(black)
(red)			(red)

The back panel includes the FortiGate-5050 chassis ground connector which must be connected to Data Center ground. Use the power wire fixtures for securing and managing DC power wires. The FortiGate-5050 chassis also includes an ESD socket on the back panel.

The back panel also contains 5 RTM slots numbered to correspond to the front panel slots. The RTM slots are available for FortiGate-5000 RTM modules such as the FortiGate-RTM-XB2 module. When the FortiGate-5050 chassis is shipped, these slots are covered by RTM slot filler panels.

Physical description of the FortiGate-5050 chassis

The FortiGate-5050 chassis is a 5U chassis that can be installed in a standard 19-inch rack. Table 5 describes the physical characteristics of the FortiGate-5050 chassis.

Table 5: FortiGate-5050 chassis physical description

Dimensions	8.75 x 17 x 15.5 in. (13.3 x 43.2 x 39.4 cm)
	(H x W x D)
Weight	26.75 lb. (12.1 kg)
Operating environment	Temperature: 32 to 104°F (0 to 45°C)
	Relative humidity: 5 to 85% (Non-condensing)
Storage environment	Temperature: -13 to 158 °F (-25 to 70°C)
	Relative humidity: 5 to 95% (Non-condensing)
Power consumption	Maximum: 1,135 W
Power input	2x redundant -48VDC to -58VDC

FortiGate-5000 Series Introduction
01-30000-83466-20090108	29
http://docs.fortinet.com/ • Feedback