MANUAL DIGITAL-SOURCE RECORDING

This function is for recording of digital output of other digital source than CD, DAT, MD and DCC.

(It is recommended to use the automatic digital-source synchro recording when recording signals from a CD, DAT, MD or DCC.)

After loading the disc, check that the CD-R or CD-RW indicator stops blinking and starts to light steadily.

In case it does not light steadily , refer to page 42.

Track numbers are automatically updated when the AUTO TRACK indicator is on.

In recordings of CD, MD, DAT, DCC and other digital sources(S/P DIF only), track numbers are automatically updated based on start-ID and / or track number included in the digital signal information.

AES/EBU digital signal or digital signal from media such as BS (satellite broad- casting) that contains no track number information are recorded in the same way as analog source.

Track numbers are automatically updat- ed if the following signal is input after 2- seconds of ”no signal” condition.

In the case of digital source input, the CR300 detects the signal less than - 90dB as ”no signal”. Track numbers are automatically updated if the signal level exceeds this level.

Therefore recordings of classical music and other music styles with long silent passages will be recorded on more tracks than required. Turn off the auto track function and create new tracks manual- ly to avoid this problem.

Press the PAUSE ( ) or PLAY ( ) buttons after the counter displays "00:00".

1 3 2

REC

TRACK NO.

FADER WREITE

REPEAT

5 6

1 Load a CD-R or CD-

Label side

RW disc containing

 

 

a recordable space.

 

 

For a disc loading, refer to

 

 

page 15.

 

 

2 Set the INPUT SELECTOR

INPUT SELECTOR

DIGITAL

XLR/+4ANALOG

to DIGITAL.

COAX

XLR/-10

 

OPT

LINE

Select the digital input to be recorded.

AES /

 

AES/EBU or OPT or COAX

EBU

 

 

 

3 Press the RECORD

 

 

(REC ) button(s).

 

 

• This unit enters record-

 

Press two buttons

pause mode.

 

• Check the copy bit indicator

 

together.

 

 

(refer to page 24).

4 Start playing the source player to confirm whether recording of that source is possible.

5 Press the pause (

) or

 

 

play ( ) button

in

 

 

record-pause mode.

or

or

 

 

6 After recording, press the stop ( ) button to end recording.

• "PMA REC" is displayed and the unit stops after recording the track data.

21

CR300 <PRB1291-A>

Page 21
Image 21
Fostex CR300 owner manual Manual DIGITAL-SOURCE Recording, Press the Record REC buttons