TRACK NUMBER WRITING
At the first, the track number automatic writing mode is selected automatically.
12
•Once the track number has been written, it cannot be modified or changed later.
•The WRITE (MANUAL) button is defeated while the WRITE (MANUAL) indicator is not lit.
•The track number can be renewed by pressing the WRITE (MANUAL) button when recording has elapsed for 4 seconds or more.
•During recording, the track number is automatically renewed by detecting the track changes based on the input musical signal and digital
•If the space between tracks is extremely short, the track number may not be advanced.
REC
TRACK NO.
FADER WREITE
• Manual writing of track number
1 Press the TRACK NO. |
|
|
|
|
|
A U T O / M A N U A L |
| Lights | |||
| |||||
button so that the |
|
|
|
|
|
W R I T E ( M A N U A L ) |
|
|
|
|
|
indicator lights. |
|
|
|
|
|
|
|
|
|
|
|
2 P r e s s t h e W R I T E |
|
|
|
|
|
(MANUAL) button at the |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
position where it is |
|
|
|
|
|
|
|
|
|
| |
required to renew the |
|
|
|
|
|
|
|
|
|
| |
track number during |
|
|
|
|
|
recording. |
|
|
|
|
|
|
|
|
|
|
|
• Automatic writing of track number
Press the TRACK NO. AUTO/ | Goes off |
MANUAL button so that the |
|
WRITE (MANUAL) indicator |
|
is not lit but that the AUTO |
|
TRACK indicator lights. | Lights |
|
CAUTION
•Track numbers are automatically updated when the AUTO TRACK indicator is on.
•In recordings of CD, MD, DAT, DCC and other digital sources(S/P DIF only), track numbers are automatically updated based on
•AES/EBU digital signal or digital signal from media such as BS (satellite broadcasting) that contains no track number information are recorded in the same way as analog source.
•Track numbers are automatically updated if the following signal is input after
•In the case of digital source input, the CR300 detects the signal less than
•In the case of analog source, the CR300 detects the signal level selected by the ”Automatic Track Number Renewal Level Sensitivity Setting” menu as ”no signal”. Track numbers are automatically updated if the signal level exceeds this level. (See page 24.)
•Therefore recordings of classical music and other music styles with long silent passages will be recorded on more tracks than required. Turn off the auto track function and create new tracks manually to avoid this problem.
26
CR300
