•If the button is pressed during programmed playback, the tracks after the track being played can be cleared.
Clearing the entire program
The program can be cleared with either A or B below.
A Press the stop ( ) button to stop |
|
programmed playback, then press |
|
the stop button again. | Press 2 times. |
| |
B Press the OPEN/CLOSE button. |
|
Clearing a track from the program
P r e s s t h e C L E A R button of the remote control unit.
•Each press clears the newest track in the program.
• This operation is available in stop mode a n d a f t e r t r a c k s h a v e b e e n programmed. If the programmed tracks are being played, stop playback before proceeding to this operation.
Checking the programmed tracks
Press the CHECK button of the remote control unit.
Program step No. Programmed track No.
•Each press displays the track number programmed for each step of the program.
•When the button is pressed while the last step of the program is displayed, "00" is displayed. Press again to display the first program step.
• This operation is available in stop mode a n d a f t e r t r a c k s h a v e b e e n programmed. If the programmed tracks are being played, stop playback before proceeding to this operation.
•The track number can also be selected
with the
or 
button.
Replacing a track in the program
1 Press the CLEAR button of the remote control unit the required number of times until the program step with the track number to be replaced is displayed.
2 Select the new track number with the numeric buttons.
When track No. is changed to 4
3 Other tracks can also be replaced by repeating steps 1 and 2.
39
CR300
