MENU BUTTON FUNCTIONS

By pressing the MENU button while the CR300 is in STOP mode, operation of various functions can be selected as shown below. Pressing the MENU but- ton every time would allows you to se- lect a different MENU.

SET MENU

1 Select a desired MENU by pressing the MENU button.

Pressing the MENU button every time would allow you to select a different setup MENU.

The current setup MENU condition is displayed.

MENU

2 By pressing either the

or

button, the setting is altered.

3 Pressing the Skip ID SET button would register the above condition.

SKIP ID

SETCLEAR

A. Copy Bit Setting

This menu selects the Copy Bit condition recorded onto a disk. (Refer to page 18, 19, 20, 21, 22)

Copy bit indicator: It indicates the Copy Bit condition while in the Record-Pause mode.

Display

Meaning

Hereafter, unlimited digital copy is possible. default Hereafter, digital copy is possible only once. Hereafter, digital copy is prohibited.

Copy bit indicator Copy Bit

Lit solid

1

Off0

Blinking 1/0

B. Auto stop delay time Setting in Digital Synchro

In this menu, length of no signal(less than -90dB) recorded section can be selected in order to stop Digital Synchro recording automatically. (Refer to page 18, 19, 20)

Display

Meaning

0 sec default

10 sec

Digital Synchro recording cannot be stopped automatically.

C. Fade In / Fade Out Time Setting

This menu allows to select the Fade in/Fade out time. (Refer to page 27, 37)

DisplayMeaning

Fade time : 6 sec default

Fade time : 9 sec

Fade time : 12 sec

Fade time : 18 sec

24

CR300 <PRB1291-A>

Page 24
Image 24
Fostex CR300 owner manual Menu Button Functions, Copy Bit Setting, Auto stop delay time Setting in Digital Synchro