Symptom Cause Remedy, Connections | Fostex CR300 specs

TROUBLESHOOTING

Symptom

Cause

Remedy

Power cannot be turned on.

The power cord is unplugged from the power outlet.

Plug the power cord into a power outlet.

The power was turned off from the component

Turn on the component into which the power

(stereo amplifier, audio time, etc.) to which it is

cord is connected.

connected.

Playback is impossible.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNECTIONS".

Recording is impossible.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNOTATIONS".

The CD-R or CD-RW disc in use has been

Use a non-finalized disc.

finalized.

Erase a CD-RW disc.

The input selection is incorrect.

Select the input connected to the desired

source.

The REC LEVEL control is set too low.

Increase the recording level to an optimum level.

Recorded sound is distorted.

Signal connections are incorrect.

C o n n e c t

p r o p e r l y

a s

i n d i c a t e d

i n

"CONNECTIONS".

There is interference from a TV set.

Turn the TV power off or install this unit apart

from the TV.

The disc is damaged or warped.

Use another disc.

The recording level is set too high.

Decrease the recording level.

The disc is extremely dirty.

Clean the disc.

Remote control operation

The remote control batteries are exhausted.

Replace both of the remote control batteries

is impossible.

with new ones.

There is an obstacle between the remote

Remove the obstacle.

control unit and main unit.

The remote control unit is operated outside the

Operate in the remote controllable range.

remote controllable range.

Certain tracks are skipped

The SKIP PLAY button is set to ON.

Set the SKIP PLAY button to OFF.

without being played.

Skip playback does not occur.

The SKIP PLAY button is set to OFF.

Set the SKIP PLAY button to ON.

A recorded CD-R disc

• The disc has not been finalized after

Finalize the disc. (Refer to page 31)

cannot be played on other

recording.

CD players.

• When such a disc is loaded in the unit, the

CD-R indicator lights up. (Refer to page 8.)

43

CR300 <PRB1291-A>

Image 43

Fostex CR300 owner manual Symptom Cause Remedy, Connections

Contents

CR300 Safety Instructions For Canadian model Information to UserPour le modele Canadien Features Contents Batteries AAA/R03 dry cell batteries Checking AccessoriesAC power cord AAA/R03 dry cell batteries ... x Battery loading method Location Precautions regarding installationCleaning the compact disc recorder CD lens cleaner CD-R and CD-RW discs DiscsDiscs usable with this unit CD-R finalization Disc storage Disc maintenanceHandling of disc Do not play a CD with a special shape Connections Digital Signal Connection Analog Signal Connection Controls and Indicators Switching the time display Operations performed by buttons marked can Wireless remote controlParallel remote control Also be carried out by using buttons with the same Open the disc tray Turn the power onDisc LOADING/UNLOADING 2,4 Track numbers are updated automatically by this unit Mode of RecordingRecording a CD, DAT, MD or DCC source S/P DIF only Recording from the middle of a disc Recording of other-than-audio signals Track recording Load a CD-R or CD All-track recordingRW disc containing Recordable space Button Automatic finalization recordingSynchro button twice Press the Finalize Press the Record REC buttons Manual DIGITAL-SOURCE RecordingAfter recording, press the stop button to end recording RW disc containing a Recordable space Press the pause Or play button Record-pause modeAdjust the recording level ANALOG-SOURCE Recording Minimum recording time per track Recording level adjustmentAdjustment reference Level meter Menu Button Functions Copy Bit SettingAuto stop delay time Setting in Digital Synchro Fade In / Fade Out Time Setting Sample Rate Converter Thru Automatic Track Number Renewal Level Sensitivity SettingAuto Pause Mode Setting Balanced Output Level Setting Press the Track no T O / M a N U a L Track Number WritingManual writing of track number Automatic writing of track number Starting recording with fade-in Convenient Functions for RecordingTo pause recording Creating a blank Checking the recording end point from the middle of a disc Press the Skip ID SET button Setting skip ID to a track Track skipSkip ID Recording Play the track to be skipped Play the track which is not to be skipped Clearing skip ID of a track Press the Finalize button What is finalization?Finalization TOC Recording RW disc which has Been recorded on Erasing CD-RW discs Erasing CD-RW only Press the pause button to start the TOC erasing Load a CD-RW disc w h i c h h a s b e e n recorded onPress the Erase button Load a CD-RW disc which has been finalized All tracks erasing Playing from the desired track Direct track selection PlaybackStarting playback To pause playback Press and hold the manual Searching an adjacent track Track searchSearching the desired point Manual search Press the track search Fade-in/fade-out during playback Playback in Auto Pause ModePress the Repeat button of the remote control unit Playing tracks repeatedly Repeat playback Programming pause Programmed PlaybackPlaying Tracks in the Desired Order Program reservation Replacing a track in the program Clearing the entire programClearing a track from the program Checking the programmed tracks Press the play button Load a disc containing the recording of skip ID dataCase skip playback is not required Message Description Ref. Character Message List Information messages related to playback operation Information messages related to recording operation Connections Symptom Cause Remedy Term Function Ref. Index Audio Unit typical Affect of Immunity on This Equipment Declaration of EC DirectivePage Fostex CO