Frymaster 1824/2424G manual Leakage, 24G SERIES FLATBOTTOM GAS FRYERS SERVICE PROCEDURES, 1-25

24G SERIES FLATBOTTOM GAS FRYERS CHAPTER 1: SERVICE PROCEDURES

1.8.5 Leakage

Frypot leaks are usually due to improperly sealed high-limit, temperature probe or oil-return and drain fittings. When installed or replaced, each of these components must be sealed with Loctite PST567 sealant or equivalent to prevent leakage. In very rare cases, a leak may develop along one of the welded corners of the frypot. When this occurs, the frypot must be repaired or replaced.

Frypot locations (indicated by arrows) where potential leaks could occur.

1-25